Emuladores compatibles

Description

Motherboard:

M3 Ver. 3.0 (c) 199? Morse

The Morse M3 V3.0 is a high-quality 80386DX Baby AT motherboard produced in the early 1990s. It stands out in the crowded 386 market by utilizing a custom logic chipset, often featuring Morse-branded ASICs that are functionally equivalent to the legendary OPTi 82C391/392 chipset. The board is designed for 386DX processors (typically clocked at 33 MHz or 40 MHz) and includes a dedicated 80387 math co-processor socket. Its expansion layout is standard for the era, utilizing eight 16-bit ISA slots. Memory management is quite flexible, with eight 30-pin SIMM sockets supporting up to 32 MB of FPM DRAM, and a sophisticated L2 cache pool that can accommodate up to 128 KB or 256 KB of high-speed SRAM in a write-back configuration.

- TRIVIA -

The "Morse" Mystery: Morse was a brand that frequently re-branded high-end reference designs. The "Morse-branded" chips on the M3 were actually custom-masked versions of the OPTi 82C39x series. This means the board is essentially a "super-tuned" OPTi reference board. Enthusiasts discovered that you could often swap the BIOS with generic OPTi-compatible MR BIOS firmware to unlock hidden performance settings or better memory timings.

Stability vs. Speed: In the retro community, the M3 V3.0 is famous for being one of the few boards that can "officially" handle the 40 MHz bus speed without constant parity errors, provided you use high-quality (60ns or faster) SIMM modules. It became a favorite for those wanting a "faster-than-spec" 386 system without the cost of a 486.

- CONTRIBUTE -

Edit this entry: https://www.arcade-history.com/game/455440/?o=2

Comentarios (0)