MAME SY-4SAW2
SY-4SAW2 Captura de pantalla

Emuladores compatibles

RetroArch
Interface unique qui fait tourner des « cœ…
ZIP
Todas las guías de emulación

SY-4SAW2

¿Te gusta este juego?

Description

Motherboard published 31 years ago:

SY-4SAW2 (c) 1995 Soyo

The SY-4SAW2 is a highly regarded late-generation 80486 Baby AT motherboard engineered by SOYO Computer Industrial around 1995 to 1996. Built around a robust 168-pin Socket 3 layout, the board is powered by the legendary SiS 85C496 (Northbridge) and SiS 85C497 (Southbridge) PCI core logic chipset. It features native, widespread support for a wide array of 486 architectures, including Intel 486SX/DX/DX2/DX4, AMD Am486, and Cyrix chips, running on Front-Side Bus speeds from 25 MHz up to 50 MHz. The expansion subsystem layout provides four 32-bit PCI slots and four 16-bit ISA slots. Peripheral handling is fully integrated via an onboard SiS Multi-I/O controller hosting dual Enhanced IDE channels (supporting PIO Mode 4), dual serial interfaces, and a parallel port. System memory is routed through four 72-pin SIMM sockets supporting up to 64 MB of RAM, coupled with a highly scalable L2 write-back static cache (SRAM) DIP bank expandable up to 512 KB.

- TRIVIA -

The PCI Bus Master Implementation: Thanks to the native SiS 496/497 chipset setup, the SY-4SAW2 bypassed the chaotic performance limits and physical length bottlenecks of the older VESA Local Bus standard. The board was famous for its excellent PCI Bus Mastering execution, allowing retro-builders to seamlessly install early PCI network adapters, high-speed graphics accelerators (like the S3 Trio or early Matrox cards), and custom sound cards without running out of stable bus bandwidth.

Silkscreen Clarity: SOYO motherboards of this era were widely praised by independent computer repair technicians and enthusiasts because the PCB featured comprehensive, clear silkscreened block diagrams and text guidelines printed directly next to the voltage and clock jumper banks. This completely removed the risk of frying a low-voltage 3.3V AMD DX4 or Am5x86 processor by accidentally running it at old-style 5V levels.

- CONTRIBUTE -

Edit this entry: https://www.arcade-history.com/game/298622/?o=2

Comment jouer à SY-4SAW2 ?
Il te faut MAME pour émuler MAME — on t'explique l'installation pas à pas.
Ver la guía

Editor

SOYO

Jugadores

1

Taille

663.11 KB

Publicidad

Versiones disponibles

Descarga tu versión preferida abajo

MAME 0.260 ROMs (non-merged)/MAME 0.260 ROMs (non-merged)/so4saw2.zip
Juego base Internet Archive MAME
663.11 KB ZIP
1
Versión
0
Descargas
1
Espejo

Comentarios (0)

Sin comentarios por el momento. ¡Sé el primero en comentar!

Dejar un comentario

0/500

Juegos similares

Dungeons & Dragons: Tower of Doom

Dungeons & Dragons: Tower of Doom

MAME

16
Jockey Club 2

Jockey Club 2

MAME

15
Ridge Racer 2

Ridge Racer 2

MAME

15
Terminator 2: Judgment Day (L-2)

Terminator 2: Judgment Day (L-2)

MAME

14
Hyper Crash

Hyper Crash

MAME

14
Monomachine SFX6 MK2

Monomachine SFX6 MK2

MAME

12